Which fileset aix

Use the AIX Advanced Deployment Wizard to deploy technology level and service pack fix packs to a new or existing alternate disk clone. Use the AIX Advanced Deployment Wizard to create Fixlets that check the preinstallation requirements of a selected fix pack against the endpoints in your environment.

You can use the AIX Advanced Deployment Wizard to create tasks to reject filesets that are in the applied state and restore the previous version of the update. You can reject individual filesets or all the filesets for a specific fix pack. You can run a preview of the action to ensure that it completes successfully without rejecting any filesets. You can also specify whether you want to reject filesets that have dependencies and do not meet the rejection checks. Learn which common factors affect the outcome of a deployment.

BigFix supports the NIM patch management features in this release. When problems occur when patching AIX endpoints, review the log files to determine what went wrong and how to correct the errors.

BigFix Patch for Red Hat Enterprise Linux provides an automated, simplified patching process that is administered from a single console.

It gives you unified, near real-time visibility and enforcement to deploy and manage patches to all Red Hat Enterprise Linux endpoints. It gives you unified, near real-time visibility and enforcement to deploy and manage patches to all CentOs endpoints. It gives you unified, near real-time visibility and enforcement to deploy and manage patches to all SUSE Linux endpoints.

BigFix Patch for Ubuntu provides an automated, simplified patching process that is administered from a single console. It gives you unified, near real-time visibility and enforcement to deploy and manage patches to all Ubuntu endpoints. It gives you unified, near real-time visibility and enforcement to deploy and manage patches to all Oracle Linux endpoints. BigFix Patch for Solaris provides an automated, simplified patching process that is administered from a single console.

However, when migrating from an older level foo. In this case, you might want to create a foo. The root foo. The installp command does not produce a warning or error message if a file listed in the Fileset.

The installp command also does not produce a message for a file that is not found during the phase following Fileset.

If any warning or error messages are desired, the product-provided executables must generate the messages. As an example of the Fileset. The information in this file is added to a fix database.

The instfix command uses this database to identify fixes installed on the system. If the Fileset. Each fix in the fileset should have its own stanza in the Fileset. A Fileset. FixKeyword can not exceed 16 characters. Abstract describes the fix and can not exceed 60 characters.

In the type field, f represents a fix, and p represents a preventive maintenance update. The filesets field contains a new-line separated list of filesets and fileset levels. FilesetLevel is the initial level in which the fileset delivered all or part of the fix. Symptom is an optional description of the problem corrected by the fix. Symptom does not have a character limit. The following example shows a Fileset. The fix for this problem is contained in two filesets.

If the package has a root part that does not contain files to be installed it does configuration only , the root part does not require the Fileset. The name of a stanza is the full path name of the file to be installed.

The stanza name ends with a colon : and is followed by a new-line character. Each attribute is described on a separate line. The following list describes the valid attributes of a file:.

The software information database is searched to determine if either Fileset or any filesets listed in the file Fileset. If so, the fileset and the installation level are written to the Fileset. If it is created, the Fileset. Each entry contains the fileset name and the fileset level.

For example, while the storm. As another example, the Baytown. While installing the Baytown. The installp command writes to the Fileset.

As a simple example of a Fileset. The small. As a more complex example of a Fileset. The LawPractice. The installation process uses the Fileset. When the new replacement fileset is installed, the installation process removes from the system all files from the old replaced fileset, even files not included in the new fileset. In the previous examples, the small. This file is used when the current fileset is packaged differently from a previous level of the fileset and the installation process should not remove previously installed files based on the fileset's entries in the inventory database.

A simple name change for a fileset is not sufficient to require a Fileset. If a Fileset. The name of a stanza is the full path name of the file or directory to be removed if found on the system. Attributes are used to identify hard links and symbolic links that need to be removed. The following list describes the valid attributes:. For example, the U. The product developers decide to split the U. The Ukraine. The Russia. The leningrad file no longer exists and is replaced by the st.

R fileset. If the Russia. A disk subsystem that will not configure with the provided SCSI or bus-attached device driver requires its own device driver and configuration methods. These installation files are provided on a supplemental diskette which accompanies the device and must be in backup format with a. The signature file must contain the string target. The startup file must use restore by name to extract the needed files from the supplemental diskette and to run the commands necessary to bring the device to the available state.

The following types of media can be used to distribute software product installation packages. The following sections describe the formats that must be used to distribute multiple product packages on each of these media.

In order to stack multiple product package images onto either a single tape or a set of tapes, the files on each tape in the set must conform to the following format:.

Fileset A is in file A. Fileset B is in file B. In order to stack multiple product package images onto a set of diskettes, the following files must be written to the set of diskettes:.

The files are written to the set of diskettes using the following rules:. The following table describes the table of contents file. Note that some fields are different for the different types of media. The Hour should be a value from 00 to All date and time fields contain two digits.

Thus, Month should be represented as 03 instead of 3 , and Year should be represented as 94 instead of The location has the format of vvv : bbbbb : sssssss where each letter represents a digit and has the following meaning:.

The major actions that can be taken with the installp command are:. Executables provided within a product package can tailor processing for the apply, reject, and remove operations. Reinstalling a fileset does not perform the same actions that removing and installing the same fileset do. Therefore, do not assume that the unconfig script was run. For example, for the ras. Reinstalling the ras. The config script should always remove the entry and then add it again.

This section describes the steps taken by the installp command when a fileset or fileset update is applied. The instal or update executable is invoked from installp with the first parameter being the device being used for the installation or update.

The default instal and update scripts are linked together; processing varies based on whether it is invoked as instal or update. The current directory is the package directory. The referenced files are described in Description of Installation Control Files. The flow within the default instal and update script is as follows:. This section describes the steps taken by the installp command when a fileset update is rejected or when a fileset or fileset update fails to complete installation.

Their logic differs slightly depending on whether the script was invoked as reject or cleanup. The following files are referenced by the default cleanup and reject script. They are described in detail in Description of Installation Control Files. The flow within the default cleanup and reject script is as follows:. This section describes the steps taken by the installp command when a fileset is removed.

Execute Fileset. The installp command uses this status file to determine appropriate processing. If you create installation scripts, your scripts should produce a status file that has the correct format.

Each line in the status file has the format:. The following example of a status file indicates to the installp command that the installations for the tcp. Contains the part of the product that can be shared among several machines with compatible hardware architectures. Contains the part of the product that cannot be shared among machines. Each client must have its own copy. Most of this software requiring a separate copy for each machine is associated with the configuration of the machine or product.

The root part of a fileset must be in the same package as the usr part of the fileset. If a fileset contains a root part, it must also contain a usr part. Contains the part of the product that can be shared among several machines, even if the machines have a different hardware architecture.

The share part of the product can include non-executable files, such as documentation and data files. A share part fileset package must be separately packaged from usr and root parts, and the fileset name cannot be the same as a fileset which has usr or root parts.

Local machine device files. Machine configuration files such as hosts and passwd. Specifies the type of bus to which the card attaches for example, mca for Micro Channel Adapter. A character field of 1 to 9 characters identifying the fix identifier. The FixID is used by Version 3. Indicates the release level of installp for which this package was built. The values are: 1 - AIX Version 3. Indicates whether this is an installation or update package and what type. The complete name of the fileset.

This field begins the heading information for the fileset or fileset update. The level of the fileset to be installed. The format is: Version. FixID should be appended for Version 3. Indicates whether a bosboot is needed following the installation. The values are: N - Do not invoke bosboot b - Invoke bosboot. Indicates the parts included in the fileset or fileset update. The values are: B -usr and root part H -share part U -usr part only. Click Here to join Tek-Tips and talk with other members!

Already a Member? Join your peers on the Internet's largest technical computer professional community. It's easy to join and it's free. Register now while it's still free! Already a member? You can force the re-install. We ran into the same issue and forced the re-install. Thanks again for your reply!

Below are the filsets I see after running lppchk -v. BTW I tried to run updates form new source and created new. F Base Security Function lslpp -L grep bos. You can get more details by running "lppchk -v -m3". I would probably try to re-install them 1 by 1. First remove problematic fileset then install it, and do it for the others as well.

Hi admin, Thanks for the excellent document it is very helpful, need to know we can perform multibos migration? Here i can find all box packages? I upgraded the tl 05 to tl Gyz who one interested for online Aix server remote for training purpose. Can I revert back to previous version of TL by rejecting the Apllied filesets of newer version? Hi, rejecting the applied filesets works for few filesets, but in a TL there are so many filesets, so it is not recommended to do that.

Adapter Virt. Anonymous September 23, at PM. Anonymous February 11, at PM. Anonymous February 13, at AM. Anonymous May 12, at PM.